Beissier's Prestonett P7, a versatile adhesive filler offering 7 functions in 1

Beissier, a specialist in substrate preparation for more than 140 years, is adding a new reference to its Prestonett range of fillers, known for their proven performance: Prestonett P7.
A versatile adhesive filler offering 7 functions in 1, Prestonett P7 benefits from the high quality of Beissier products, providing genuine guarantees of ease of application, competitiveness and optimal results.

Moreover, this new Prestonett solution greatly simplifies supply and stock management, while also helping to reduce waste on construction sites. Not to mention the versatility and performance inherited from the Prestonett references, synonymous with easy preparation and a smooth finish.

The new high-quality versatile adhesive filler, 7 in 1

The latest creation from Beissier R&D, Prestonett P7 takes its name from the 7 applications it allows for interior work. First, it ensures the installation of plaster or aerated concrete blocks.

In addition, Prestonett P7, with excellent adhesion, perfectly bonds plasterboard (with or without insulation) as well as staff mouldings, cornices and ceiling roses, and fixes any polystyrene element. Ideal for treating joint tapes, it also fills holes, cracks and chases. Finally, the Prestonett P7 adhesive filler can level substrates of various types with a perfectly smooth finish.

Depending on the roughness of the substrates and the type of use, Prestonett P7 has a consumption of 0,25 to 3 kg/m2, for an application thickness of 4 cm. Made in France and rated A+, Prestonett P7 can be applied by hand on any type of substrate: concrete, aerated concrete, cement, concrete block, brick, plaster and derivatives, plasterboard, old paint, old textured coating, glass fabric.

Another advantage is that Prestonett P7 can be overcoated with primer, paint or light wall coverings, leaving a wide choice of possible finishes. Finally, note that tools (smoothing trowel, filling blade, putty knife) are simply cleaned with water.

Technical characteristics
Dilution: 45-50% - i.e. 0,45-0,50 litre of water per 1 kg of powder
pH: 7 ± 0,5

Colour: White

Working time at 20 °C: From 1 h to 1 h 30

Average consumption:
- Installation of plaster blocks: 1 to 2,5 kg/m²
- Bonding of plasterboard (with or without insulation): 2 to 3 kg/m²
- Filling: 1 kg of powder fills a volume of 1 litre 1
- Levelling: 1 kg/m²
- Smoothing: 0,25 kg/m²
- Joint tape treatment: 0,45 kg/linear metre
Waiting time before overcoating: After complete drying
Classification: NF T 36-005 - Family III, class 3
Standards: NF EN 16566 - NF EN 13 963, class 3b - NF EN 12860
VOC: < 0,5 g/l (pae)
Fire rating: M0 on M0
Packaging: 15 kg bag