Nicoll, a major player in the production of elements made of synthetic materials, has for 50 years been developing responses which are always more innovative and tailored to the needs of buildings, sanitary facilities and the environment.
With this expertise, this specialist in injection and extrusion completes the Romold® range of inspection glasses and inspection boxes with the injection molded PP DN 1000. Immersion at the heart of an innovative and sustainable system ...
Robustness and longevity of a high-performance and certified product
Rugged, the DN 1000 Injected Modular Glaze allows installation up to 5 meters deep in ground water and up to 6 meters at least outside the water table.
It offers an alternative to traditional materials by guaranteeing a perfect resistance to corrosion, hydrogen sulphide and various shocks. The Romold® modular DN 1000 injected is a powerful and durable solution, guaranteed for 10 years, and with a long life well above concrete (up to 100 years!).
Recognized for the quality of its material and its technology, the Romold® system has been certified since 2009: its three ATECs are now replaced by the NFA mark, attesting to its conformity with the standard NF EN 13598-2: a pledge of Performance and undeniable durability!
An ingenious modular system complementing the Romold® range
The Romold® modular DN 1000 injected PP complements the Romold® modular range (DN 625 and 800) and the Romold® single-piece range (DN 625, 800 and 1000).
The latest addition to the 1000's injected, the new Romold® has the best weight / performance ratio on the market.
Its reinforced cone is equipped with rungs and sling rings. With its vertical ribs, it provides excellent resistance to traffic and heavy loads.
Its 4 heights make it possible to adapt the height of the look to the needs of the site (25, 50, 75, 100 cm) as much as possible to save material and time on site. In addition to being lightweight and easy to maneuver, they are equipped with sling rings for better handling on site.
The rungs are made of PP reinforced glass fibers, conforming to the standard NF EN 13101, and light colored to facilitate the descent in the look.
Horizontal and vertical ribs allow the eye to be anchored in the embankment.
The bases have a flat bottom, stable, rigid and highly resistant to deformations.
Completely smooth, the cunette allows an optimal flow of effluents, significantly reduces the phenomenon of deposits and ensures the continuity of the water. Welded by hand, it is disconnected from the bottom of the base in order to avoid deformation due to ground or ground motion.
Allowing easy assembly by welding or joint, the Look DN 1000 in PP injected Romold® easily integrates with all networks.
Waterproofing on all types of ground
Like the previous models in the range, the Romold® modular DN 1000 injected offers an optimum sealing between all elements thanks to the double-lipped elastomer seals NFA certified.
Minimum penalty, maximum adaptability: promise for Romold® DN 1000 injected!
Maximum adaptability for any type of terrain and connection
Compatible with all types of networks, the Romold® DN 1000 injected PP fit easily adapts to site constraints:
• thanks to a wide range of adapter sleeves for sandstone and concrete pipes;
• thanks to the 4 heights of raises (25, 50, 75, 100 cm) allowing an adjustment to the ground;
• by the possibility of cutting the cone on 25 cm for a perfect finish;
• via a wide range of cuvettes offering one, two or three entrances.
Easy installation and maintenance!
The Romold® Modular DN 1000 injected secures and facilitates the implementation and maintenance of networks. It guarantees a quick and safe installation thanks to the lightness of its elements (from 15 kg to 50 kg maximum) which are manuportable and slingable.
The inputs and outputs are female / female for faster connection, and they accept an angular deviation of plus or minus 3.75 ° during the connections, for an implementation with serenity.
It should also be noted that inspection and access during maintenance operations are made easier and more secure thanks to rungs and an anti-skid and light-colored cushion.
With this expertise, this specialist in injection and extrusion completes the Romold® range of inspection glasses and inspection boxes with the injection molded PP DN 1000. Immersion at the heart of an innovative and sustainable system ...
Robustness and longevity of a high-performance and certified product
Rugged, the DN 1000 Injected Modular Glaze allows installation up to 5 meters deep in ground water and up to 6 meters at least outside the water table.
It offers an alternative to traditional materials by guaranteeing a perfect resistance to corrosion, hydrogen sulphide and various shocks. The Romold® modular DN 1000 injected is a powerful and durable solution, guaranteed for 10 years, and with a long life well above concrete (up to 100 years!).
Recognized for the quality of its material and its technology, the Romold® system has been certified since 2009: its three ATECs are now replaced by the NFA mark, attesting to its conformity with the standard NF EN 13598-2: a pledge of Performance and undeniable durability!
An ingenious modular system complementing the Romold® range
The Romold® modular DN 1000 injected PP complements the Romold® modular range (DN 625 and 800) and the Romold® single-piece range (DN 625, 800 and 1000).
The latest addition to the 1000's injected, the new Romold® has the best weight / performance ratio on the market.
Its reinforced cone is equipped with rungs and sling rings. With its vertical ribs, it provides excellent resistance to traffic and heavy loads.
Its 4 heights make it possible to adapt the height of the look to the needs of the site (25, 50, 75, 100 cm) as much as possible to save material and time on site. In addition to being lightweight and easy to maneuver, they are equipped with sling rings for better handling on site.
The rungs are made of PP reinforced glass fibers, conforming to the standard NF EN 13101, and light colored to facilitate the descent in the look.
Horizontal and vertical ribs allow the eye to be anchored in the embankment.
The bases have a flat bottom, stable, rigid and highly resistant to deformations.
Completely smooth, the cunette allows an optimal flow of effluents, significantly reduces the phenomenon of deposits and ensures the continuity of the water. Welded by hand, it is disconnected from the bottom of the base in order to avoid deformation due to ground or ground motion.
Allowing easy assembly by welding or joint, the Look DN 1000 in PP injected Romold® easily integrates with all networks.
Waterproofing on all types of ground
Like the previous models in the range, the Romold® modular DN 1000 injected offers an optimum sealing between all elements thanks to the double-lipped elastomer seals NFA certified.
Minimum penalty, maximum adaptability: promise for Romold® DN 1000 injected!
Maximum adaptability for any type of terrain and connection
Compatible with all types of networks, the Romold® DN 1000 injected PP fit easily adapts to site constraints:
• thanks to a wide range of adapter sleeves for sandstone and concrete pipes;
• thanks to the 4 heights of raises (25, 50, 75, 100 cm) allowing an adjustment to the ground;
• by the possibility of cutting the cone on 25 cm for a perfect finish;
• via a wide range of cuvettes offering one, two or three entrances.
Easy installation and maintenance!
The Romold® Modular DN 1000 injected secures and facilitates the implementation and maintenance of networks. It guarantees a quick and safe installation thanks to the lightness of its elements (from 15 kg to 50 kg maximum) which are manuportable and slingable.
The inputs and outputs are female / female for faster connection, and they accept an angular deviation of plus or minus 3.75 ° during the connections, for an implementation with serenity.
It should also be noted that inspection and access during maintenance operations are made easier and more secure thanks to rungs and an anti-skid and light-colored cushion.