Description
The new reinforced hydraulic bucket GVL 500l arrives just in time to complete the Goubard range of excavators and buckets.
Ideal for high-density materials (sand, gravel, etc.)
Its three major advantages:
- A body reinforced by 4 gussets covering the bottom and part of the back panel for better distribution of stresses.
- A rounded shape for better loading, so the loader fatigues much less during the pile-up.
- A centre of gravity located 890 mm from the heel of the forks, which reduces stress on the carriage.
A practical bucket
With body/chassis pivots and cylinder clevises mounted on bushings: no risk of seizing.
- In case of wear, only the bushings need replacing, without any mechanical-welding work to change the steel pivots.
- Finally, the body has no protruding parts inside: no more 'nests' where materials get trapped.
Technical specifications of the GVL 500l bucket
Bucket with grab width: 1250 mm
Bucket with body profile: 1000 mm
Useful height: 500 mm
Bucket weight: 350 kg
Hydraulic dumping by 2 cylinders 70 x 35 double-acting, to be connected to the loader
Bucket supplied with hoses fitted with male couplers 3/8ème mounted on a support
Sleeve section and bucket centre distance modifiable on request
Bevelled wear plate. Hardness 400 HB
Ideal for high-density materials (sand, gravel, etc.)
Its three major advantages:
- A body reinforced by 4 gussets covering the bottom and part of the back panel for better distribution of stresses.
- A rounded shape for better loading, so the loader fatigues much less during the pile-up.
- A centre of gravity located 890 mm from the heel of the forks, which reduces stress on the carriage.
A practical bucket
With body/chassis pivots and cylinder clevises mounted on bushings: no risk of seizing.
- In case of wear, only the bushings need replacing, without any mechanical-welding work to change the steel pivots.
- Finally, the body has no protruding parts inside: no more 'nests' where materials get trapped.
Technical specifications of the GVL 500l bucket
Bucket with grab width: 1250 mm
Bucket with body profile: 1000 mm
Useful height: 500 mm
Bucket weight: 350 kg
Hydraulic dumping by 2 cylinders 70 x 35 double-acting, to be connected to the loader
Bucket supplied with hoses fitted with male couplers 3/8ème mounted on a support
Sleeve section and bucket centre distance modifiable on request
Bevelled wear plate. Hardness 400 HB
Technical specifications
| Category | Equipment : Construction site equipment |
|---|---|
| Subcategory | Earthworks, Compaction |
