Description
Turnkey integrated system for polyurea coatings - sprays up to 7,6 litres (2 gallons) per minute.
Reactor integrated proportioning systems combine an electric Reactor and a diesel generator in a single unit. Designed for polyurea applications.
An innovative design that recovers waste heat and saves energy:
The system recovers heat from the diesel engine to heat the A and B components
Since the proportioner is not equipped with heaters (or only small heaters), the generator's electrical requirements are reduced, allowing a smaller generator to be used
The system's smaller 20 kW generator consumes less fuel than a standard 30 or 40 kW generator
Achieve an average saving of 6 000 ? on your annual fuel bill (actual savings may vary)
Advanced controls
Project tracking information
Download data to a USB key for later analysis
Stores up to 24 chemical formulations
On-screen troubleshooting guidance
Flexible system configuration
Rapid product heating
In a single pass through the heat exchanger, products can be heated by a delta T of 55 °C (100 °F)
This improved heating capacity means you can start spraying sooner
Reactor integrated proportioning systems combine an electric Reactor and a diesel generator in a single unit. Designed for polyurea applications.
An innovative design that recovers waste heat and saves energy:
The system recovers heat from the diesel engine to heat the A and B components
Since the proportioner is not equipped with heaters (or only small heaters), the generator's electrical requirements are reduced, allowing a smaller generator to be used
The system's smaller 20 kW generator consumes less fuel than a standard 30 or 40 kW generator
Achieve an average saving of 6 000 ? on your annual fuel bill (actual savings may vary)
Advanced controls
Project tracking information
Download data to a USB key for later analysis
Stores up to 24 chemical formulations
On-screen troubleshooting guidance
Flexible system configuration
Rapid product heating
In a single pass through the heat exchanger, products can be heated by a delta T of 55 °C (100 °F)
This improved heating capacity means you can start spraying sooner
Technical specifications
| Category | Equipment : Construction site equipment |
|---|---|
| Subcategory | Coating machines and equipment |
